Contact us 简体中文 ENGLISH
 
 
SENDON Luxuries Series: 600,1000,2000
SENDON Offline Series:600C,1000C
SENDON Intelligent Online Series:1KVA
SENDON Network Online Series: 2KVA
SENDON Network Online Series:3KVA
SENDON Network Online Series:6KVA
SENDON Genius Series UPS:10~20KVA
SENDON Pioneer Series UPS:6~60KVA
SENDON Advantage Series UPS:10~400KVA
 
 
 
Products
 
You are here: Home > Products
 
Name: SENDON Pioneer Series UPS:6~60KVA
Introduction:

      3-phase in / 1-phase out

      On-line double conversion technology

      Static switch bypass

      Manual Maintenance bypass

      CPU control

      Multi-function LCD and LED front panel

      Remote monitoring and control management

      Remote notify

      Redundant architecture design

      Expandable back-up time capability

      Auto diagnostics, alarm

      Low audible noise level

     

     

    流程图: 终止: SENDON PIONEER UPS feature:     

      Complete power protection by an on-line double conversion design incorporating an automatic static bypass from overload and fault conditions.

      Low running costs with a high operating efficiency. SENDON GENIUS UPS uses IGBT(insulated gate bipolar transistor) technology in the inverter to achieve its high efficiency.

      Wide input voltage range to minimize chances of battery cutting in and extend battery life.

      CPU control, easy to monitor and control all functions of the UPS including operation,battery management, automatic restart and shutdown, and provide real time mains-and load readings.

      High reliability and low maintenance. SENDON GENIUS UPS has a built in manual maintenance bypass, MTBF (mean time between failure) more than 200,000 hours, and MTTR(mean time to repair) less than 15 minutes.

      High level remote monitoring and control via Port RS232 . According with TCP/IP 、SNMP. Sending remote notify by e-mail, pager or mobile phone. Clear front panel with LCD and LED provide real time information of UPS operation status.

      By using sophisticated logic cortrol system. SENDON PIONEER ups provide hight reliability transfer redundant system and up to eight-unit parallel system.

      3-phase input/1-phase output .It is not necessary to consider the load balance, easy to use.

     

    流程图: 终止: SENDON PIONEER UPS Specifications:     


    MODELS
    1006
    1010
    1015
    1020
    1030
    1040
    1060
    Power(CosФ=0.8)(KVA)
    6
    10
    15
    20
    30
    40
    60
    INPUT
    Nominal Volt.
    380V±25%( 3 phase 4 wires)
    Frequency
    50Hz±10%
    INVERTER OUTPUT
    Phase
    1phase
    Nominal Volt.
    220V
    Crest Factor
    3:1
    Wave Form
    sine wave
    THD
    3%
    Volt. Stability
    ±1%
    Volt. Transient Response
    ±5%(0-100% Load step)
    Frequency
    The same of input
    Frequency Stability
    (without synchronization ) 50Hz±0.5%
    (with synchronization) 50Hz±2%
    Over load
    120% , 10 min.
    150% , 1 min.
    BATTERY
    Type
    Maintenance-free sealed Lead-Acid battery VLAP
    Volt.
    192V
    384V
    BYPASS SYSTEM
    Configuration
    static switch+Manual maintenance by pass
    Input Phase
    1phaes
    Input Volt. Tolerance
    ±15%
    Transfer switch time
    0(Make before break)
    SYSTEM
    Computer Interface
    RS232
    Operating Temperature
    0-40℃
    Relative Humidity
    95% (Non-condensing)
    Operating Altitude
    1000m at rated power(-1% for each 100m over 1000m) – max. 4000m
    Noise at 1 m(dB)
    <50dB
    Standards
    UL、CE surge voltage PROTECTION reach 1000V, Suppression of electromagnetic disturbance reach the class A level of FCC
    Dimension (D*W*H)mm
    675*330*970
    680*375*970
    680*580*970
    700*560*1220
    Weight (Kg)
    112
    128
    178
    200
    300
    380
    510
     
       
    ONLINE COMMUNICATION
       
    ONLINE COMMUNICATION
       
    ONLINE  COMMUNICATION
       
    ONLINE  COMMUNICATION
     
     
    Copyright SENDON INTERNATIONAL LTD. by SENDON INTERNATIONAL LTD.
    Email:sendon@sendon.com.cn  ICP备07500028号